Articles and Patents Utilizing the SpeedMixer®

Note: this is a randomly selected sampling of peer reviewed articles, patents and scientific papers which utilize the SpeedMixer^®. You can click here to search Google Scholar for ‘FlackTek’ to see a more comprehensive listing of patent literature and scientific articles utilizing our technology, the SpeedMixer^®.

Ceramics Applications:

Heilmann, F., et al. “Fe 2 O 3-doped forsterite ceramics as a joining partner for ZrO 2 in a laser brazing process.” Journal of the European Ceramic Society 29.13 (2009): 2783-2789.

Borchardt, Lars, et al. “Structuring zeolite bodies for enhanced heat-transfer properties.” Microporous and Mesoporous Materials 208 (2015): 196-202.

Michels, Nina-Luisa, Sharon Mitchell, and Javier Pérez-Ramírez. “Effects of binders on the performance of shaped hierarchical MFI zeolites in methanol-to-hydrocarbons.” ACS Catalysis 4.8 (2014): 2409-2417.

Sun, Li, Basak Oguz, and Patrick Kwon. “Powder mixing effect on the compaction capabilities of ceramic powders.” Powder Technology 195.3 (2009): 227-234.

Bai, Mingwen, Fangwei Guo, and Ping Xiao. “Fabrication of thick YSZ thermal barrier coatings using electrophoretic deposition.” Ceramics International 40.10 (2014): 16611-16616.

Bhosale, Prasad S., and John C. Berg. “The dynamics of polymer bridge formation and disruption and its effect on the bulk rheology of suspensions.” Langmuir 28.49 (2012): 16807-16811.

Peng, Yucheng, Douglas J. Gardner, and Yousoo Han. “Drying cellulose nanofibrils: in search of a suitable method.” Cellulose 19.1 (2012): 91-102.

Wang, M., and P. Kwon. “Improving Densification of Zirconium Tungstate with Nano Tungsten Trioxide and Sintering Aids.” ASME 2013 International Manufacturing Science and Engineering Conference collocated with the 41st North American Manufacturing Research Conference. American Society of Mechanical Engineers, 2013.

Kwon, Patrick. Development of Powder Processing Models and Techniques for Meso-scale Devices: Perspirable Skin. MICHIGAN STATE UNIV EAST LANSING DEPT OF MECHANICAL ENGINEERING, 2008.

Geng, Xin, et al. “An original way to investigate silver migration through silicon carbide coating in TRISO particles.” Journal of the American Ceramic Society 97.6 (2014): 1979-1986.

Furman, Benjamin R., et al. “Structural and mechanical behavior of layered zirconium phosphonate as a distributed phase in polycaprolactone.” Journal of applied polymer science 114.2 (2009): 993-1001.

Wang, Zepu, et al. “Effect of high aspect ratio filler on dielectric properties of polymer composites: a study on barium titanate fibers and graphene platelets.” Dielectrics and Electrical Insulation, IEEE Transactions on 19.3 (2012): 960-967.

Maloney, John J., et al. “Glass Compositions And Glass Frit Composites For Use In Optical Applications.” U.S. Patent Application No. 15/007,364.

Rueschhoff, Lisa M., Jeffrey P. Youngblood, and Rodney W. Trice. “Stabilizing Highly Loaded Silicon Nitride Aqueous Suspensions Using Comb Polymer Concrete Superplasticizers.” Journal of the American Ceramic Society(2016).

Electrical Applications:

Caliano, Giosué, et al. “cMUT sensor for applications as a wide-band acoustic receiver in the MHz range.” Ultrasonics Symposium (IUS), 2010 IEEE. IEEE, 2010.

Bao, Li-Rong, Bin Wei, and Allison Y. Xiao. “Conductive coating formulations with low silver content.” Electronic Components and Technology Conference, 2007. ECTC’07. Proceedings. 57th. IEEE, 2007.

Song, Yingze, et al. “Enhancing the thermal, electrical, and mechanical properties of silicone rubber by addition of graphene nanoplatelets.” Materials & Design 88 (2015): 950-957.

Wang, Zepu, et al. “Graphene oxide filled nanocomposite with novel electrical and dielectric properties.” Advanced Materials 24.23 (2012): 3134-3137.

Jain, S., et al. “Electrical properties of an isotropic conductive adhesive filled with silver coated polymer spheres.” Microelectronics and Packaging Conference (EMPC), 2011 18th European. IEEE, 2011.

Ren, Hu-Ming, et al. “Preparation and performance of Ag-coated Cu flakes filled epoxy as electrically conductive adhesives.” Journal of Solid State Lighting 1.1 (2014): 1-7.

Jain, Sonal, et al. “Factors affecting conduction in novel isotropic conductive adhesives filled with silver coated polymer spheres.” Microelectronics Packaging Conference (EMPC), 2013 European. IEEE, 2013.

Desai, Shanta, and James Njuguna. “Enhancement of thermal conductivity of materials using different forms of natural graphite.” IOP Conference Series: Materials Science and Engineering. Vol. 40. No. 1. IOP Publishing, 2012.

Davis, Chelsea S., et al. “Cure temperature influences composite electrical properties by carbon nanotube-rich domain formation.” Composites Science and Technology 133 (2016): 23-32.

Reit, Radu, et al. “Thiol–epoxy/maleimide ternary networks as softening substrates for flexible electronics.” Journal of Materials Chemistry B 4.32 (2016): 5367-5374.

Li, W., U. W. Gedde, and H. Hillborg. “Structure and electrical properties of silicone rubber filled with thermally reduced graphene oxide.” IEEE Transactions on Dielectrics and Electrical Insulation 23.2 (2016): 1156-1163.

Razak, Aliff Hisyam A., et al. “Mechanically Compliant Electrodes and Dielectric Elastomers from PEG-PDMS Copolymers.”

Lang, Christopher M. “Conductive Coatings for Active Electrochemical Materials.” U.S. Patent No. 20,160,072,123. 10 Mar. 2016.

Vatani, Morteza, Mohamad Vatani, and J. W. Choi. “Multi-layer stretchable pressure sensors using ionic liquids and carbon nanotubes.” Applied Physics Letters 108.6 (2016): 061908.

Batteries:

Wang, Chao, et al. “Self-healing chemistry enables the stable operation of silicon microparticle anodes for high-energy lithium-ion batteries.” Nature chemistry 5.12 (2013): 1042-1048.

Jost, Kristy, et al. “Natural fiber welded electrode yarns for knittable textile supercapacitors.” Advanced Energy Materials 5.4 (2015).

Shin, Hosop, et al. “Effects of Fluoroethylene Carbonate (FEC) on Anode and Cathode Interfaces at Elevated Temperatures.” Journal of The Electrochemical Society 162.9 (2015): A1683-A1692.

Rudin, Thomas, and Sotiris E. Pratsinis. “Homogeneous iron phosphate nanoparticles by combustion of sprays.” Industrial & engineering chemistry research 51.23 (2012): 7891-7900.

Lee, Yoon Koo. EFFECTS OF TRANSITION METAL DISSOLUTION AND DEPOSITION ON LI-ION BATTERIES: A MULTI-SCALE APPROACH. Diss. Missouri University of Science and Technology, 2015.

Renteria, J., et al. “Magnetically-functionalized self-aligning graphene fillers for high-efficiency thermal management applications.” Materials & Design 88 (2015): 214-221.

Tee, Benjamin CK, et al. “An electrically and mechanically self-healing composite with pressure-and flexion-sensitive properties for electronic skin applications.” Nature nanotechnology 7.12 (2012): 825-832.

Jana, R. N., and H. Bhunia. “Thermal stability and proton conductivity of silane based nanostructured composite membranes.” Solid State Ionics178.37 (2008): 1872-1878.

Eberman, Kevin Wilmot, and Lawrence Robert Heyn. “Non-rechargeable batteries and implantable medical devices.” U.S. Patent Application No. 13/010,720.

Hellring, Stuart D., et al. “Pretreatment compositions and methods for coating a battery electrode.” U.S. Patent Application No. 13/832,074.

Jana, R. N., and H. Bhunia. “Thermal stability and proton conductivity of silane based nanostructured composite membranes.” Solid State Ionics178.37 (2008): 1872-1878.

Biological Applications:

Rodrigues, Marcela C., et al. “Calcium and phosphate release from resin‐based materials containing different calcium orthophosphate nanoparticles.” Journal of Biomedical Materials Research Part B: Applied Biomaterials 103.8 (2015): 1670-1678.

Maiti, Pralay, Carl A. Batt, and Emmanuel P. Giannelis. “New biodegradable polyhydroxybutyrate/layered silicate nanocomposites.” Biomacromolecules8.11 (2007): 3393-3400.

Li, Bing, et al. “The effects of rhBMP-2 released from biodegradable polyurethane/microsphere composite scaffolds on new bone formation in rat femora.” Biomaterials 30.35 (2009): 6768-6779.

Kalita, Harjyoti, et al. “Bio-based poly (vinyl ether) s and their application as alkyd-type surface coatings.” Green Chemistry 16.4 (2014): 1974-1986.

Peng, Yucheng, et al. “Influence of drying method on the material properties of nanocellulose I: thermostability and crystallinity.” Cellulose 20.5 (2013): 2379-2392.

Dumas, Jerald E., et al. “Synthesis and characterization of an injectable allograft bone/polymer composite bone void filler with tunable mechanical properties.” Tissue Engineering Part A 16.8 (2010): 2505-2518.

Robinson, Jennifer L., et al. “Achieving interconnected pore architecture in injectable polyHIPEs for bone tissue engineering.” Tissue Engineering Part A20.5-6 (2014): 1103-1112.

Qi, Na, et al. “Sustained delivery of cytarabine-loaded vesicular phospholipid gels for treatment of xenografted glioma.” International journal of pharmaceutics 472.1 (2014): 48-55.

Dumas, Jerald E., et al. “Synthesis, characterization, and remodeling of weight-bearing allograft bone/polyurethane composites in the rabbit.” Acta biomaterialia 6.7 (2010): 2394-2406.

Jiang, Chaoyang, et al. “Mechanical properties of robust ultrathin silk fibroin films.” Advanced functional materials 17.13 (2007): 2229-2237.

Donius, Amalie E., et al. “Superior mechanical performance of highly porous, anisotropic nanocellulose–montmorillonite aerogels prepared by freeze casting.” Journal of the mechanical behavior of biomedical materials 37 (2014): 88-99.

Peng, Yucheng, et al. “Maleic anhydride polypropylene modified cellulose nanofibril polypropylene nanocomposites with enhanced impact strength.” Polymer Composites (2014).

Page, Jonathan M., et al. “Matrix rigidity regulates the transition of tumor cells to a bone-destructive phenotype through integrin β3 and TGF-β receptor type II.” Biomaterials 64 (2015): 33-44.

Dhulst, Elizabeth A., William H. Heath, and John M. Torkelson. “Hybrid thiol-acrylate-epoxy polymer networks: Comparison of one-pot synthesis with sequential reactions and shape memory properties.” Polymer (2016).

Gestranius, Marie, et al. “Phase behaviour and droplet size of oil-in-water Pickering emulsions stabilised with plant-derived nanocellulosic materials.” Colloids and Surfaces A: Physicochemical and Engineering Aspects (2016).

Ruppender, Nazanin S., et al. “Matrix rigidity induces osteolytic gene expression of metastatic breast cancer cells.” PloS one 5.11 (2010): e15451.

Tuladhar, Anup, Cindi M. Morshead, and Molly S. Shoichet. “Circumventing the blood–brain barrier: Local delivery of cyclosporin A stimulates stem cells in stroke-injured rat brain.” Journal of Controlled Release 215 (2015): 1-11.

Guelcher, Scott A., et al. “Synthesis and in vitro biocompatibility of injectable polyurethane foam scaffolds.” Tissue engineering 12.5 (2006): 1247-1259.

Kaspar, Roger L., and Tycho Speaker. “METHODS OF TREATING PAIN AND/OR ITCH WITH SMALL MOLECULE INHIBITORS TARGETING AN mTOR PATHWAY.” U.S. Patent Application No. 14/965,839.

Donaghue, Irja Elliott. Controlled Delivery of Therapeutic Proteins to the Injured Spinal Cord. Diss. University of Toronto, 2016.

Hendrix, Andrew S., et al. “Repurposing the nonsteroidal anti-inflammatory drug diflunisal as an osteoprotective, anti-virulence therapy for Staphylococcus aureus osteomyelitis.” Antimicrobial Agents and Chemotherapy (2016): AAC-00834.

Elliott Donaghue, Irja, Charles H. Tator, and Molly S. Shoichet. “Local delivery of neurotrophin-3 and anti-NogoA promotes repair after spinal cord injury.” Tissue Engineering Part A 22.9-10 (2016): 733-741.

Food:

Fu, B. X., et al. “Pigment loss from semolina to dough: rapid measurement and relationship with pasta colour.” Journal of Cereal Science 57.3 (2013): 560-566.

Cosmetics:

Liu, Yihan, and Stig E. Friberg. “Perspectives of phase changes and reversibility on a case of emulsion inversion.” Langmuir 26.20 (2010): 15786-15793.

Fairman, Evelyn. “Avoiding Aggregation During Drying and Rehydration of Nanocellulose.” (2014).

Bui, Hy Si, et al. “Cosmetic compositions comprising wax dispersions and thermoreversible gelling polymers.” U.S. Patent Application No. 13/652,328.

Jansen, Joseph Harry, Joseph Michael Zukowski, and Paul Robert Tanner. “Cosmetic Composition.” U.S. Patent Application No. 14/245,230.

Thomas, Xavier, et al. “Silicone film former for delivery of actives.” U.S. Patent No. 8,968,773. 3 Mar. 2015.

Willis, Michael, et al. “Water dispersible solid dispersion of pigment.” U.S. Patent Application No. 13/878,198.

Ahn, Dongchan, et al. “Hydrophilically-modified silicone compositions.” U.S. Patent Application No. 13/503,639.

Dental Applications:

Boulden, Jordan E., et al. “Thiol–ene–methacrylate composites as dental restorative materials.” dental materials 27.3 (2011): 267-272.

Aydin Sevinç, Berdan, and Luke Hanley. “Antibacterial activity of dental composites containing zinc oxide nanoparticles.” Journal of Biomedical Materials Research Part B: Applied Biomaterials 94.1 (2010): 22-31.

Randolph, Luc D., et al. “The effect of ultra-fast photopolymerisation of experimental composites on shrinkage stress, network formation and pulpal temperature rise.” Dental Materials 30.11 (2014): 1280-1289.

Schneider, Luis Felipe J., et al. “Influence of photoinitiator type on the rate of polymerization, degree of conversion, hardness and yellowing of dental resin composites.” Dental Materials 24.9 (2008): 1169-1177.

Pfeifer, C. S., et al. “Factors affecting photopolymerization stress in dental composites.” Journal of dental research 87.11 (2008): 1043-1047.

Schneider, Luis Felipe J., et al. “Curing efficiency of dental resin composites formulated with camphorquinone or trimethylbenzoyl-diphenyl-phosphine oxide.” Dental materials 28.4 (2012): 392-397.

Xu, Xiaoming, et al. “Synthesis and characterization of antibacterial dental monomers and composites.” Journal of Biomedical Materials Research Part B: Applied Biomaterials 100.4 (2012): 1151-1162.

Chan, K. S., et al. “Improving fracture toughness of dental nanocomposites by interface engineering and micromechanics.” Engineering fracture mechanics 74.12 (2007): 1857-1871.

Schneider, Luis Felipe J., et al. “Effect of co-initiator ratio on the polymer properties of experimental resin composites formulated with camphorquinone and phenyl-propanedione.” dental materials 25.3 (2009): 369-375.

Moraes, Rafael R., et al. “Control of polymerization shrinkage and stress in nanogel-modified monomer and composite materials.” dental materials 27.6 (2011): 509-519.

Huyang, George, Anne E. Debertin, and Jirun Sun. “Design and development of self-healing dental composites.” Materials & Design 94 (2016): 295-302.

Kaizer, M. R., et al. “Silica Coating of Nonsilicate Nanoparticles for Resin-Based Composite Materials.” Journal of Dental Research (2016): 0022034516662022.

Campos, Luiza MP, et al. “Evaluation of flexural modulus, flexural strength and degree of conversion in BISGMA/TEGDMA resin filled with montmorillonite nanoparticles.” Journal of Composite Materials (2016): 0021998316656925.

Bocalon, Anne CE, et al. “Polymerization stress of experimental composites containing random short glass fibers.” Dental Materials 32.9 (2016): 1079-1084.

Bacchi, Ataís, and Carmem S. Pfeifer. “Rheological and mechanical properties and interfacial stress development of composite cements modified with thio-urethane oligomers.” Dental Materials (2016).

Wang, Zhengzhi, and Martin YM Chiang. “System compliance dictates the effect of composite filler content on polymerization shrinkage stress.” Dental Materials 32.4 (2016): 551-560.

Nano:

Ganguli, S., et al. “Effect of multi-walled carbon nanotube reinforcement on the fracture behavior of a tetrafunctional epoxy.” Journal of materials science40.13 (2005): 3593-3595.

Ganguli, Sabyasachi, et al. “Thermally Conductive Epoxy Nanocomposites.” ASME 2007 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2007.

Ganguli, Sabyasachi, Ajit K. Roy, and David P. Anderson. “Improved thermal conductivity for chemically functionalized exfoliated graphite/epoxy composites.” Carbon 46.5 (2008): 806-817.

Song, Yingze, et al. “Enhancing the thermal, electrical, and mechanical properties of silicone rubber by addition of graphene nanoplatelets.” Materials & Design 88 (2015): 950-957.

Hasan, Sayyeda M., et al. “Effects of Isophorone Diisocyanate on the Thermal and Mechanical Properties of Shape‐Memory Polyurethane Foams.” Macromolecular Chemistry and Physics 215.24 (2014): 2420-2429.

Chakrabarty, Souvik, et al. “Processing dependence of surface morphology in condensation cured PDMS nanocomposites.” Polymer 51.24 (2010): 5756-5763.

Rouvière, Pierre E., et al. “Bionanotechnology application of polypeptides in a hair color product: Self‐assembly enables expression, processing, and functionality.” Biotechnology journal 8.2 (2013): 247-256.

Renteria, J., et al. “Magnetically-functionalized self-aligning graphene fillers for high-efficiency thermal management applications.” Materials & Design 88 (2015): 214-221.

Gupta, Maneesh K., et al. “Patterned silk films cast from ionic liquid solubilized fibroin as scaffolds for cell growth.” Langmuir 23.3 (2007): 1315-1319.

Baikerikar, Kiran K., Michael L. Tulchinsky, and John Argyropoulos. “UV curable, liquid diacrylate monomers based on (cis, trans)-1, 3/1, 4-cyclohexanedimethanol.” Journal of Coatings Technology and Research 7.2 (2010): 175-188.

Cheng, Ya‐Jun, et al. “In situ formation of silver nanoparticles in photocrosslinking polymers.” Journal of Biomedical Materials Research Part B: Applied Biomaterials 97.1 (2011): 124-131.

Elliott Donaghue, Irja, Charles H. Tator, and Molly S. Shoichet. “Local delivery of neurotrophin-3 and anti-NogoA promotes repair after spinal cord injury.” Tissue Engineering ja (2016).

Wang, Lu, et al. “In-situ modification of cellulose nanofibrils by organosilanes during spray drying.” Industrial Crops and Products (2016).

Lopez, Alexander M., Hailey Dunsworth, and Jamie A. Hestekin. “Reduction of the shadow spacer effect using reverse electrodeionization and its applications in water recycling for hydraulic fracturing operations.” Separation and Purification Technology 162 (2016): 84-90.

Robinson, Jennifer, et al. “Osteoinductive PolyHIPE Foams as Injectable Bone Grafts.” Tissue Engineering ja (2016).

Espanol, Montserrat, et al. “Impact of Porosity and Electrolyte Composition on the Surface Charge of Hydroxyapatite Biomaterials.” ACS applied materials & interfaces (2015).

Abba, Mohammed T., et al. “Nacre-like hybrid films: Structure, properties, and the effect of relative humidity.” Journal of the mechanical behavior of biomedical materials 55 (2015): 140-150.

Aerospace:

Ganguli, Sabyasachi, et al. “Thermally Conductive Epoxy Nanocomposites.” ASME 2007 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2007.

Ganguli, Sabyasachi, Ajit K. Roy, and David P. Anderson. “Improved thermal conductivity for chemically functionalized exfoliated graphite/epoxy composites.” Carbon 46.5 (2008): 806-817.

Singhal, Pooja, et al. “Ultra low density biodegradable shape memory polymer foams with tunable physical properties.” U.S. Patent Application No. 13/797,631.

Keledjian, Raquel, and Renhe Lin. “CURE-ON-DEMAND MOISTURE-CURABLE URETHANE-CONTAINING FUEL RESISTANT PREPOLYMERS AND COMPOSITIONS THEREOF.” U.S. Patent No. 20,160,090,507. 31 Mar. 2016.

Adhesives, Sealants and Coatings:

Phamduy, Paul, and Byungki Kim. “Microcapsules Containing Solvent and Epoxy With Multi-Walled Carbon Nanotubes for Self-Healing.” ASME 2014 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2014.

Johnson, Michael A., and Steven L. Falteisek. “Gel sealing corrosion prevention tape.” U.S. Patent Application No. 13/988,563.

Clapper, Jason D., et al. “Low temperature vibration damping pressure sensitive adhesives and constructions.” U.S. Patent Application No. 14/416,877.

Xia, Jianhui, et al. “Optical assemblies including stress-relieving optical adhesives and methods of making same.” U.S. Patent Application No. 13/813,183.

Lubricants and Oil:

Nguyen, Trung, et al. “Minimum Quantity Lubrication (MQL) Using Vegetable Oil With Nano-Platelet Solid Lubricant in Milling Titanium Alloy.” ASME 2015 International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2015.

Park, Kyung-Hee, Brent Ewald, and Patrick Y. Kwon. “Effect of nano-enhanced lubricant in minimum quantity lubrication balling milling.” Journal of Tribology 133.3 (2011): 031803.

Nguyen, Trung Kien, Patrick Y. Kwon, and Kyung-Hee Park. “A Critical Factor in Enhancement of MQL Lubricants: Platelet Thickness.” ASME 2013 International Manufacturing Science and Engineering Conference collocated with the 41st North American Manufacturing Research Conference. American Society of Mechanical Engineers, 2013.

Oil and Gas Applications:

Mahoney, Robert P., et al. “SELF-SUSPENDING PROPPANTS FOR HYDRAULIC FRACTURING.” U.S. Patent No. 20,160,137,913. 19 May 2016.

Nurul’Ain, H., et al. “Natural Palm Olein Polyol as a Replacement for Polyether Polyols in Viscoelastic Polyurethane Foam.” Journal of the American Oil Chemists’ Society (2016): 1-11.

Grease and Lubrication Applications:

Nguyen, Trung Kien, et al. “EXPERIMENTAL RESULTS ON LAMELLAR-TYPE SOLID LUBRICANTS IN ENHANCING MINIMUM QUANTITY LUBRICATION (MQL) MACHINING.” (2016).

3D Printing / Additive Manufacturing Applications:

Costakis, William J., et al. “Additive manufacturing of boron carbide via continuous filament direct ink writing of aqueous ceramic suspensions.” Journal of the European Ceramic Society 36.14 (2016): 3249-3256.

Sears, Nicholas A., Prachi S. Dhavalikar, and Elizabeth M. Cosgriff‐Hernandez. “Emulsion Inks for 3D Printing of High Porosity Materials.” Macromolecular Rapid Communications 37.16 (2016): 1369-1374.

Rodriguez, Jennifer N., et al. “Shape-morphing composites with designed micro-architectures.” Scientific Reports 6 (2016).

Clausen, A., Wang, F., Jensen, J. S., Sigmund, O., & Lewis, J. A. (2015). “Topology optimized architectures with programmable Poisson’s ratio over large deformations.” Advanced Materials, 27(37), 5523-5527.

Polymer Science Applications:

Hasan, Sayyeda M., et al. “Development of siloxane-based amphiphiles as cell stabilizers for porous shape memory polymer systems.” Journal of Colloid and Interface Science (2016).

Beniah, Goliath, et al. “Novel Thermoplastic Polyhydroxyurethane Elastomers as Effective Damping Materials over Broad Temperature Ranges.” European Polymer Journal (2016).

Ren, Ning, et al. “Filler-Reinforced Elastomers Based on Functional Polyolefin Prepolymers.” Industrial & Engineering Chemistry Research(2016).

Jin, Kailong, et al. “Phase-Separated Thiol–Epoxy–Acrylate Hybrid Polymer Networks with Controlled Cross-Link Density Synthesized by Simultaneous Thiol–Acrylate and Thiol–Epoxy Click Reactions.” Macromolecules (2016).

Wang, Chenyu, et al. “Sticky or slippery wetting: network formation conditions can provide a one-way street for water flow on Pt cured silicone.” ACS applied materials & interfaces (2016).

Parker, Shelbi, et al. “High‐Tg Thiol‐Click Thermoset Networks via the Thiol‐Maleimide Michael Addition.” Macromolecular rapid communications (2016).

Kiziltas, Esra Erbas, Alper Kiziltas, and Douglas J. Gardner. “Rheological and Mechanical Properties of Ultra-fine Cellulose-Filled Thermoplastic Epoxy Composites.” BioResources 11.2 (2016): 4770-4780.

Kamar, Nicholas T., and Lawrence T. Drzal. “Micron and nanostructured rubber toughened epoxy: A direct comparison of mechanical, thermomechanical and fracture properties.” Polymer 92 (2016): 114-124.

Wang, Yu, et al. “Some Aspects of Thermal Transport across the Interface between Graphene and Epoxy in Nanocomposites.” ACS applied materials & interfaces 8.12 (2016): 8272-8279.

Wang, Lu, et al. “In-situ modification of cellulose nanofibrils by organosilanes during spray drying.” Industrial Crops and Products (2016).

Lithium Ion and Battery Applications:

Theivanayagam, Murali G., et al. “LITHIUM ION BATTERIES.” U.S. Patent No. 20,160,149,205. 26 May 2016.

Optics Applications:

Kim, Hyun I., Geena L. Ferrelli, and Rafael J. Zaldivar. “Evaluating the use of self-assembled monolayer (SAM) release coatings for replicated optics.” Journal of Adhesion Science and Technology (2016): 1-13.

Manzani, Danilo, et al. “Highly nonlinear Pb 2 P 2 O 7-Nb 2 O 5 glasses for optical fiber production.” Journal of Non-Crystalline Solids 443 (2016): 82-90.

Mixing Cells:

Li, H., Wijekoon, A., & Leipzig, N. D. (2014). “Encapsulated neural stem cell neuronal differentiation in fluorinated methacrylamide chitosan hydrogels.” Annals of biomedical engineering, 42(7), 1456-1469.

Li, H., Koenig, A. M., Sloan, P., & Leipzig, N. D. (2014). “In vivo assessment of guided neural stem cell differentiation in growth factor immobilized chitosan-based hydrogel scaffolds.” Biomaterials, 35(33), 9049-9057.

Literature & Resources